Posted on

Prep

STEP 1
Ensure the leather surface is clean and dry to the touch.

STEP 2
Apply a small amount of Angelus Leather Preparer & Deglazer onto a rag, sponge, applicator pads, cotton balls, or Q-tips.

STEP 3
Wipe down the desired area and allow the product to completely dry. This will remove the factory paint/finish, leaving a clean surface that Angelus Paint will best adhere to.


STEP 1
In order to prepare patent leather you will need high grade sandpaper and adhesion promoter. Lightly sand down the patent with the sand paper.

STEP 2
After giving it an even sand, wipe down the areas using Angelus Leather Preparer & Deglazer.

STEP 3
Once dry, apply two to three even coats of adhesion promoter allowing the shoes to dry between coats.


STEP 1
In order to prepare vinyl you will need high grade sandpaper and adhesion promoter. Lightly sand down the vinyl with the sand paper.

STEP 2
After giving it an even sand, wipe down the areas using Angelus Leather Preparer & Deglazer.

STEP 3
Once dry, apply two to three even coats of adhesion promoter allowing the shoes to dry between coats.


STEP 1
In order to prepare Nike Foamposites you will need high grade sandpaper and adhesion promoter. Lightly sand down the surface with the sand paper.

STEP 2
After giving it an even sand, wipe down the areas using Angelus Leather Preparer & Deglazer.

STEP 3
Once dry, apply two to three even coats of adhesion promoter allowing the shoes to dry between coats.


Adhesion Promoter is a product (usually aerosol) that is used to help paint adhere to non leather surfaces such as rubber, plastics and more.


 

Although Leather Preparer and Acetone can both be used for the same purpose, Acetone has much stronger chemicals which can harm or burn leather due. Leather Preparer is a safer alternative which will not harm leather when applying.

Leave a Reply